Home > Products > Communication Equipment > Repeater > 27dBm 80db Dual Band Signal Booster GSM 3G Repeater
27dBm 80db Dual Band Signal Booster GSM 3G Repeater
Overview:30dBm signal repeater Dual system series are designed for business places indoor coverage solution. Such as the bookstore, the restaurant, the coffee shop, the KTV, the bar, the parking pot, the super market&am......
Send Inquiry
Product Description
Overview:
30dBm signal repeater Dual system series are designed for business places indoor coverage solution. Such as the bookstore, the restaurant, the coffee shop, the KTV, the bar, the parking pot, the super market, big office...It can support any two systems of CDMA, EGSM, GSM, DCS, PCS, WCDMA, AWS, LTE.
Using a revolutionary technology that protects the carrier network, the ET-CR30D-F dual system repeater improves indoor cellphone coverage by capturing and repeating the outside signal, bringing it into the building and enhancing it.
This process creates a "Cell Zone" in blind signal area.
Features:
1. Elegant and Compact design
2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
3.31dB MGC(Manual gain control) 1dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.
4. Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.
5. Low power consumption.
Coverage:
2000-3500sq. M coverage.
Specifications:
30dBm signal repeater Dual system series are designed for business places indoor coverage solution. Such as the bookstore, the restaurant, the coffee shop, the KTV, the bar, the parking pot, the super market, big office...It can support any two systems of CDMA, EGSM, GSM, DCS, PCS, WCDMA, AWS, LTE.
Using a revolutionary technology that protects the carrier network, the ET-CR30D-F dual system repeater improves indoor cellphone coverage by capturing and repeating the outside signal, bringing it into the building and enhancing it.
This process creates a "Cell Zone" in blind signal area.
Features:
1. Elegant and Compact design
2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
3.31dB MGC(Manual gain control) 1dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.
4. Auto shut off function available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.
5. Low power consumption.
Coverage:
2000-3500sq. M coverage.
Specifications:
| Electrical specification | Uplink | Downlink | |
| Frequency Range | CDMA850 | 824 ~ 849 MHz | 869 ~ 894 MHz |
| GSM900 | 890 ~ 915 MHz | 935 ~ 960 MHz | |
| EGSM | 880 ~ 915 MHz | 925 ~ 960 MHz | |
| DCS | 1710 ~ 1785 MHz | 1805 ~ 1880 MHz | |
| PCS | 1850 ~ 1910 MHz | 1930 ~ 1990 MHz | |
| WCDMA | 1920 ~ 1980 MHz | 2110 ~ 2170 MHz | |
| AWS | 1710 ~ 1755 MHz | 2110 ~ 2155 MHz | |
| LTE | 700 MHz( A, B, C, D band optional) | ||
| 2500 ~ 2550 MHz | 2620 ~ 2670 MHz | ||
| Max .Gain | ≥ 80dB | ≥ 85dB | |
| Max .Output Power | ≥ 23dBm | ≥ 30dBm | |
| Band width (-3dB) | Wide Band | ||
| MGC ( Step Attenuation ) | ≥ 31dB / 1dB step | ||
| Automatic Level Control | ≥ 15dB,auto shut off 31dB after 15dB | ||
| Gain Flatness | ≤6dB(P-P) | ||
| Noise Figure | ≤6dB | ||
| VSWR | ≤1.8 | ||
| Group Delay | ≤5μs | ||
| Frequency stability | ≤0.01ppm | ||
| Spurious Emission & Output inter-modulation | GSM Meet ETSI TS 151 026 V6.1.0 | ||
| WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 ) | |||
| CDMA Meet IS95 & CDMA2000 | |||
| LED Alarm | Standard | ||
| Power LED | Green light when power on. | ||
| ALC LED | Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB, LED off after 5 second red color | ||
| Mechanical Specifications | Standard | ||
| I /O Port | N-Female | ||
| Impedance | 50 ohm | ||
| Operating Temperature | -25ºC~+55ºC | ||
| Environment Conditions | IP40 | ||
| Dimensions | 250x220x52mm | ||
| Weight | ≤ 3.5Kg | ||
| Power Supply | Input AC90~264V,output DC12V / 3A | ||
Related Category
Broadcast Intercom System
Communication Cables
Fiber Optic Equipment
Fixed Wireless Terminals
Other Telecommunications Products
PBX
Repeater
Telecom Parts
Telecommunication Tower
VoIP Products
WiFi Finder
Wireless Networking Equipment
Send Inquiry
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
